WFI System, Water For Injection System, Water For Injection System Manufacturer
a
a


WFI Distribution Loop System

WFI Distribution Loop System have the following special features :

  • Material of construction - SS 316L.

  • Internals electro polished to Ra < 0.8.

  • Externals Mechanically polished to 180 grit finish.

  • Welding technique - Automatic Orbital Welding.

  • All interconnections through triclovers.

  • All valves are of self draining type.

  • All gaskets are of Teflon.

  • Dead leg not more than 6d for d < 30mm.

  • Dead leg not more than 3d for d >/=30mm.

  • Entire installation will be completely drainable.

  • Slope of the low point must be 1: 100 minimum.

Following accessories are supplied as a part of the WFI Distribution Loop System:

  • WFI circulation pump.

  • Saunders diaphragm valves.

  • Temperature Indicator cum Controller.

  • Flow Indicator cum Totalizer.

  • Conductivity Indicator cum Controller.

  • Sanitary Diverting Valve.

  • Back Pressure Valve.

  • Panel board with Data Logger, printer and alarm system

WFI System, Water For Injection System, Water For Injection System Manufacturer
WFI Distribution Loop System

 

We Manufacture: Purified Water System, Purified Water Generation System, Purified Water Distribution System, RO-EDI System, RO System, Pharmaceutical Water System, Stainless Steel Tubes and Tube Fittings, Water Distribution System, Pharmaceutical Water Distribution System, Sanitary Fittings, Ultrafiltration System, USP Water System, Pigging System, Orbital Welding Services, Electropolishing Services, WFI Water System, Multi Column Distillation Plant, SS Tanks and Vessels, SS Piping and Distribution System.